Telephone Base Installation - AT&T ATT-E2120 User Manual

91-000040-010-000_E2120ManualMP_R0Aug0904.qxd
Getting Started

Telephone base installation

Install the telephone base as shown below. Choose a base location away from
electronic equipment, such as personal computers, television sets or microwave ovens.
Avoid excessive heat, cold, dust or moisture.
Fold down tab to
support antenna
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111.
Be sure to use an electrical outlet not controlled by a wall switch.
Plug power cord transformer
into electrical outlet
Plug line cord
into telephone
jack
Place antenna upright away from the tele-
phone, and away from electronic devices.
6
8/9/2004 10:06 AM Page 6
Plug antenna cord into
antenna jack