To Set The Wakeup Alarm - AT&T ATT-E2120 User Manual

91-000040-010-000_E2120ManualMP_R0Aug0904.qxd
1
WAKE TIME
12:00
PM
Press and hold until time blinks.
2
HOUR
AM
6:00
Press to select wakeup hour (press
and hold to advance quickly)
3
MIN
AM
6:30
Press to select wakeup minute
(press and hold to advance quickly)
4
WAKE TIME
AM
6:30
Press to set wakeup time
to displayed time.
5
WAKE MODE
12:00
PM
Press repeatedly to select wake mode
(radio, buzzer, or alarm off).
Awake to radio
Awake to buzzer
No icon = Alarm off.
8/9/2004
Clock Radio Operation

To set the wakeup alarm

To set the wakeup time
To set the alarm clock, press and hold
the display begins blinking, then follow the steps at left
to set your desired wakeup time.
While setting the wakeup time, you can press
to advance by 1 digit, or hold down the buttons to
MIN
advance more quickly.
You can press the
WAKE TIME
check your programmed wakeup time.
To select wakeup alarm type
Press the button to choose whether you
WAKE MODE
want to be awakened by the radio or the build-in
buzzer.
Each time you press
WAKE MODE
appear to indicate your choice, as shown at left. When
no icon appears the alarm is turned off, and you will not
be awakened.
NOTE: If you set the wake mode to Radio, make sure the radio is
tuned to a station with a strong signal, and the volume is set high enough to
awaken you (see page 18).
NOTE: If electrical power is lost for more than 15 minutes, the wakeup
time will change to 12:00 and you will have to reset it.
16
10:06 AM Page 16
until
WAKE TIME
or
HOUR
button at any time to
a different icon will