Using The Radio - AT&T ATT-E2120 User Manual

91-000040-010-000_E2120ManualMP_R0Aug0904.qxd
1
RADIO ON/OFF
12:35
PM
AM KHz
560
Press to turn radio on or off.
2
AM/FM
12:35
PM
96.
0
FM MHz
Press to select AM or FM band.
3
TUNE +/-
12:35
PM
97.
0
FM MHz
Press to change frequency. Hold to
search for stations.
Use wheel on side of base
to adjust radio volume.
1
MEMORY
12:35
PM
188.
0
FM MHz
Tune station, then press
MEMORY.
2
M3
12:35
PM
3
188.
0
FM MHz M
Press memory button ( ,
M1 M2
3
MEMORY
12:35
PM
3
188.
0
FM MHz M
Press again to save.
MEMORY
Clock Radio Operation

Using the radio

Basic radio functions
Press
RADIO ON/OFF
to select a frequency band.
AM/FM
Each time you turn on the radio it automatically tunes
to the last station selected.
Manual tuning
In either AM or FM mode, press the
repeatedly to select a specific frequency.
increases the frequency;
frequency.
Station searching
Press and hold either
search for stations. When a strong signal is found, the
radio remains tuned to that station. To continue
searching, press and hold either
Radio memory buttons
Memory buttons allow you to tune up to 10 favorite
stations with one button press. Each memory button
can store one AM station and one FM station.
Tune to any station, then follow the steps at left to
store it in a memory button (
station is programmed, you can tune to it directly by
pressing a memory button.
, etc.)
NOTE: If electrical power is lost for more than 15 minutes, memory
will be lost and buttons M1 through M5 will have to be reprogrammed.
18
8/9/2004 10:06 AM Page 18
to turn the radio on or off. Press
buttons
TUNE
TUNE +
decreases the
TUNE —
button to automatically
TUNE
button again.
TUNE
through
M1 M5
). After the