To Set The Clock - AT&T ATT-E2120 User Manual

91-000040-010-000_E2120ManualMP_R0Aug0904.qxd
1
SET CLOCK
12:00
PM
Press and hold until time blinks.
2
HOUR
1:00
PM
Press to select correct hour (press
and hold to advance quickly)
3
MIN
1:23
PM
Press to select correct minute
(press and hold to advance quickly)
4
SET CLOCK
1:23
PM
Press to set clock to
displayed time.
8/9/2004
Clock Radio Operation

To set the clock

You should set the clock so the alarm function can
awaken you at the correct time of day.
Press and hold
SET CLOCK
blinking, then follow the steps at left to set the clock.
While setting the clock, you can press
advance by 1 digit, or hold down the buttons to
advance more quickly.
NOTE: If electrical power is lost for more than 15 minutes, the time
display will change to 12:00 and you will have to reset the clock.
15
10:06 AM Page 15
until the display begins
or
HOUR MIN
to