The individual fields on this screen are defined as follows:
Field Name
Description
Enable WPS
[Enabled, Disabled] Enables Wi-Fi Protected Setup.
Select the method [STA PIN, AP PIN] for how the WPS PIN is generated. Select the desired radio button then click
Enter STA PIN
the
Use AP PIN
If both the
made active.
Set Authorized Station
When manually pairing via WPS, enter the MAC address of the client device you are trying to connect.
MAC
[Configured, Unconfigured] Select Configured to have the gateway assign security settings to clients. Select
Set WPS AP Mode
Unconfigured when you wish to have an external client assign security settings to your SmartRG gateway.
Device PIN
(Auto generated by the access point.)
Network Authentication
Select the desired network security authentication type.
Note that many of the fields in the Manual Setup portion of the screen vary based on the choice of Network Authentication.
Each variation is presented below.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Add Enrollee
button if necessary to add a specific, enrollee station.
PIN
field and
Set Authorized Station MAC
are left blank, the
PBC
(push-button) mode is automatically
80