SmartRG SR350N User Manual page 35

Field Name
Use the following Static IP address
WAN IP Address
WAN Subnet Mask
WAN gateway IP address
Advanced DMZ
NON DMZ IP Address
NON DMZ Net Mask
Obtain an IPv6 address automatically
Dhcpv6 Address Assignment (IANA)
Dhcpv6 Prefix Delegation (IAPD)
Use the following Static IPv6 address
WAN IPv6 Address/Prefix Length
WAN Next-Hop IPv6 Address
* For additional info see the SmartRG Support site's knowledgebase.
Enter the NAT Settings.
No selections are required. All settings are optional.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
Use this section to manually declare the Static IP information provided by your ISP.
Enter the static WAN IPV4 Address.
Enter the static Subnet Mask.
Enter the static Gateway IP address.
(Optional) Check this option to enable Advanced DMZ on the WAN service.*
(Optional)
Broadcast a specific vendor ID for the DHCP server to accept the device.
Enter a secondary LAN IP address for the gateway. e.g. 192.168.2.1
When you wish the ISP to automatically assign the WAN IP to the gateway.
Select this option for CPE to receive WAN IP from ISP.
Select this option for CPE to generate WAN IP’s prefix from server rest by MAC address.
Use this section to manually declare v6 the Static IP information provided by your ISP.
Enter the IP address / prefix length
Enter the IP address of
34