SmartRG SR350N User Manual page 64

Modulation Data Transmission Rate
AnnexL Annex L of ITU-T G.992.3 standard which supports longer loops but with reduced transmission rates.
ITU-T G.992.5 standard.
ADSL2+ Max Downstream: 28 Mbps
Max Upstream: 1.0 Mbps
Annex L of ITU-T G.992.5 standard which supports extended upstream bandwidth.
AnnexM Max Downstream: 24 Mbps
Max Upstream: 3 Mbps
ITU-T G.993.2 standard.
VDSL2 Max Downstream: 100 Mbps
Max Upstream: 60 Mbps
Parameter
Max DS Tx Power (dBm)
Max US Tx Power (dBm)
Min bidirectional net data rate
Field Name
Inner Pair/Outer Pair
Bitswap Enable
SRA Enable
Mode
Normal
Reverb
Medley
No Retrain
L3
Click the Apply button place the gateway in test mode.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
8a 8b
+17.5 +20.5
Other Settings
Description
The RJ11 connector has four contacts. The center pair of pins is DSL1. The outer pair pins are the contacts for
DSL2. Select which pair should be used.
Enables adaptive handshaking functionality
Enables Seamless Rate Adaptation
Test Modes
Description
Puts the DSL PHY in test mode, sending only a Normal signal.
Puts the DSL PHY in test mode, sending only a REVERB signal
Puts the DSL PHY in test mode, sending only a MEDLEY signal.
The DSL PHY will attempt to establish a connection as in Normal mode, but once the connection is up, it
will not retrain even if the signal is lost.
Puts the DSL modem in the L3 power state.
8c 8d
+11.5
+14.5
50Mbps
12a 12b 17a
+14.5
68Mbps 100Mbps
63