SmartRG SR350N User Manual page 102

The individual fields on this screen are defined as follows:
Field Name
OUI-Serial
TR-069 Client
Inform Interval
ACS URL
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
Select whether to use the base MAC address or the serial number of your gateway when connecting
to the ACS. (Optional) For SmartRG gateways bearing firmware version 2.5.0.2 and
above:
Set the modem's TR-069 client to report Serial Number instead of MAC address to the ACS.
This value may appear in an ACS user interface information display when looking at the device
details of a particular gateway that has checked in. Enable this by selecting Serial Number as
the alternate value using the radio button adjacent to this field.
MAC (MAC address) is default for this field and the most typical scenario. For firmware versions
prior to 2.5.0.2, MAC is the only available option.
Disable/Enable TR-069 client on the CPE. The TR-069 WAN Management Client can be disabled if no
ACS is employed.
Note however that if there is a possibility of adding an ACS to your infrastructure in the future, it is
recommended to leave this option enabled. When this feature is set to off, every gateway deployed
with this default must be manually/locally re-configured to enable this client if later needed.
The frequency (in seconds) with which the CPE (gateway) checks in with the ACS to sync and exchange
data. A typical production environment entails CPEs in the field informing to the ACS once/day or
every 86,400 seconds.
URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter
MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL indicates that the ACS supports
101