SmartRG SR350N User Manual page 103

Field Name
ACS User Name
ACS Password
WAN Interface used by TR-069 client
* For example, enter. http://customer.acs.youracsurl.com, all in lower case.
The ACS URL may further include a port specification suffix e.g. http://customer.acs.wanmanagmentservices.com:30005
(Where :30005 is the port number.)
NOTE: This value may not need to be specified depending on the ACS platform in use. i.e. Cisco Prime Home would not require 3005 to be
declared. Refer to your ACS platform documentation for details.
While 30005 is the default value for SmartRG gateways, some ACS product's Management Servers may require a different value for remote
management. SmartRG products have technology to accommodate such requirements for several ACS products:
Cisco Prime Home
l
ClearVision
l
Calix Consumer ACS
l
and others
l
Minimum firmware v2.5.0.x is required. Please consult SmartRG Support when a change from the default is required.
Next, you may optionally configure the modem client Connection Request mechanism used by your ACS for communication with subscriber
gateways.
NOTE: Please consult with your ACS vendor for any specific connection request requirement impacted by the following settings.
Use the GetRPCMethods buttons to force the gateway to attempt to sync with the ACS. This will assist you in verifying the TR-069 parameters
entered above.
Field Name
Connection Request Authentication
Connection Request Username
Connection Request Password
Connection Request URL
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
Description
SSL. The "host" p ortion of this URL is used by the CPE for validating the certificate from the ACS when
using certificate-based authentication.
User name by which this gateway logs in to the ACS.
Password to authenticate the above user name.
Choose any WAN, LAN, Loop back or a configured connection to declare how this gateway will connect
to the ACS.
Description
Check this checkbox if your ACS requires authenticated connection requests. Complete the additional
credential fields that are exposed.
User name by which this gateway authenticates the ACS. Many ACS platforms utilize "admin", or
"tr069", as typical default values but this may have been customized to some other value.
The password by which this gateway will authenticate to the ACS.
There is typically no need to set the Connection Request URL as it is normally established
automatically based on the effective WAN IP. In some cases the port can be configured as needed. An
example value for this field may look like, http://xxx.xxx.xxx.xxx:30005/ where the xxx values are
specific WAN IP octet numbers.
Note: The default port value is 30005.
This may need to be configurable for interoperability as a function of ACS vendor, and so please
consult with SmartRG if this is necessary.
102