Basic Call Features - Nortel 2210 User Manual

Features, functions, and buttons
This section describes some of the WLAN Handset buttons and call features:
• "Basic call features" on page 19
• "Push-to-Talk" on page 22
Note: For more information about the features available to your WLAN Handset and how to use
them, refer to the Business Communications Manager Telephone Feature Card.
The user must end every call, by pressing the Power Off/End Call key, to
release system resources and allow the WLAN Handset to function properly.
If this is not done, it will result in the ringer not ringing and you might miss an
important call.

Basic call features

You can make external and internal calls using the following features:
• Make a call
• Answer a call
• Hold a call
• Use the headset
• Mute a call
Make a call
There are many ways to make a call, depending on your handset programming and the type of call.
External calls using line keys
1
Press
2 Press
3 Press a number key (1 through 6) corresponding to the desired line key.
4 Dial the external number.
External calls using intercom keys
1 Press
2 Press
IMPORTANT!
User MUST end every call
to go off-hook.
to access the Feature menu.
to go off-hook.
to access the Feature menu.
Nortel Networks WLAN Handset 2210/2211 User Guide
19