Nortel 2210 User Manual page 26

26 Troubleshooting
• Press
You can also press
(off-hook) state.
View Current Call Server
The Current Call Server option shows the Call Server IP address and port number. This option is
for display purposes. You cannot edit this option.
View the Current Call Server:
1
Press
2
Press the Up and Down buttons to scroll through the menu and highlight
3
Press the Select button (or
the handset.
4 Do one of the following:
• Press
• Press
You can also press
(off-hook) state.
View Terminal Type
The Terminal Type option shows the handset type used by the system. The Terminal Type option is
for display purposes only. You cannot edit this option.
View the Terminal Type:
1 Press
2 Press the Up and Down buttons to scroll through the menu and highlight
3 Press the Select button (or
Note: The terminal type must be i2004. If it is not, please contact your system administrator.
4 Do one of the following:
• Press
• Press
You can also press
(off-hook) state.
N0009103 2.0
to exit all menus and return to the standby state.
Exit
from the top-level menu to exit the menu and return to the active
when in the standby state.
OK
) to view the current call server IP address and port number for
UP
to return to the previous menu and set another option.
to exit all menus and return to the standby state.
Exit
from the top-level menu to exit the menu and return to the active
when in the standby state.
OK
) to view the terminal type for the handset.
UP
to return to the previous menu and set another option.
to exit all menus and return to the standby state.
Exit
from the top-level menu to exit the menu and return to the active
Current Call Svr
.
Terminal Type
.