Nortel 2210 User Manual page 7

Status area
The status area displays the handset status. It can include:
• status indicators (see the table below)
• left and right arrows
• a series of dots representing the line keys, which change to a number when active
The following table describes the status indicators on your WLAN Handset.
Table 2 Status indicators
No Service
Melody
Note: The No Service status indicator displays in the information area of the handset display.
Information area
The Information area shows:
• the extension number of the handset
• a line for general information
• features and call information when the handset is in use
Feature options area
When a feature is activated, or when you are on an active call, the Feature options area shows you
the action you must take to proceed.
For example: Pswd
The Feature options area shows the label for the
These button labels appear directly above the Feature and display soft keys, and to the right of the
Ftre
label on the display. These button labels vary, depending on the feature in use.
Note: The WLAN Handset does not support scrolling. Therefore any features that require the
ability to scroll are not supported.
You are outside the coverage area and cannot receive or place calls. An audible alarm
also sounds. Return to the coverage area to re-establish the connection.
Your battery pack charge is low. An audible beep also sounds. Replace your battery
pack within two minutes.
You have a new voicemail message.
A melody is played when the WLAN Handset is turned on for the first time following a
completed charge.
. This means you must enter your mailbox password.
Ftre
soft key and for the three display soft keys.
Nortel Networks WLAN Handset 2210/2211 User Guide
Getting started 7