Adjustment - Panasonic WV-SW559 Installation Manual

Adjustment

z
Adjust the camera angle.
When determining the camera angle, repeat fine adjustments by gradually moving the panning
table, tilting table, and azimuth adjustment ring.
Horizontal position (Panning)
Loosen the panning lock screw, rotate the panning table to adjust the pan direction. (Adjustable
range: 340 °)
Panning is possible within the range of 180 ° (when panning clockwise) and 160 ° (when panning
counterclockwise).
After adjustment, tighten the panning lock screw to fix the panning table.
(Recommended tightening torque: 0.59 N·m {0.44 lbf·ft})
Vertical position (Tilting)
Loosen the tilting lock screws (x2), and rotate the tilting
table to adjust the tilting direction. (Adjustable range:
±75 °) Since a variable focal lens is used, it is possible to
change the angular field of view. This lens can also be
rotated in the reverse direction, but the image azimuth is
reversed. In this case, the image azimuth can be modified
when the panning table is rotated to the direction of clock-
wise panning (180 °).
34
160 °
(counterclockwise)
Home position
180 °
(clockwise)
Panning lock screw
Panning table
Tilting lock screw (x2)
–75 °
Adjustable range
+75 °