Specifications - Panasonic WV-SW559 Installation Manual

Specifications

• Basic
Power source:
Power consumption:
Ambient operating temperature:
Ambient operating humidity:
Waterproof:
Shock resistance:
Monitor output (for adjusting the
angular field of view):
EXT I/O terminal cable:
Microphone/line input cable
For microphone input:
For line input:
Audio output cable
Dimensions:
Mass:
Finish:
* When using this product without turning the power off. (However, the temperature inside the cam-
era shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when the ambient
temperature is -30 °C {-22 °F} or higher. The auto focus function is not available until the heater
unit of the camera raises the internal temperature of the camera.
42
12 V DC, PoE (IEEE802.3af compliant)
SW559
SW558
* ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL
1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/
CSA 60950-1).
-40 °C to +50 °C {-40 °F to 122 °F}*
Less than 90 % (no condensation)
Camera: IP66 (IEC60529)
* Only when installation work specified in this book is properly
performed and appropriate waterproof treatment is performed
Compliant with 50 J (IEC 60068-2-75)/IK10 (IEC 62262)
VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jack
SW559
SW558
SW559
: ø3.5 mm monaural mini jack
Input impedance: Approx. 2 kΩ
Applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Input level: Approx. –10 dBV
SW559 : ø3.5 mm stereo mini jack (monaural output)
Output impedance: Approx. 600 Ω
Line level
ø164 mm x 146 mm (H) x 191.5 mm (W)
{ø6-15/32 inches x 5-3/4 inches (H) x 7-17/32 inches (W)}
(including projection of the base cover fixing screw)
Approx. 1.6 kg {3.53 lbs}
Main body: Aluminum die cast, light gray
Dome section: Clear polycarbonate resin
12 V DC: 850 mA, PoE 48 V: 180 mA (Class 0 devices)
12 V DC: 830 mA, PoE 48 V: 175 mA (Class 0 devices)
ALARM IN1/ DAY/NIGHT IN,
ALARM IN2/ ALARM OUT,
ALARM IN3/ AUX OUT (x1 for each)
ALARM IN, ALARM OUT, AUX OUT (x1 for each)