Alignment - Konica Minolta pagepro 5650EN Service Manual

Field Service Ver. 1.0 Nov. 2007
D. HALFTONE 256
Function • Prints the halftone pattern with 100 % level.
Use • To check the unevenness of the density and the pitch.
Setting 1. Set the A4S or letter S media on the tray.
/procedure 2. Select [HALFTONE 256] and press the Menu/Select key.
3. Select desired color with the up key /down key
4. Select [PRINT] and press the Menu/Select key.
E. GRADATION
Function • Prints the gradation pattern.
Use • To check the gradation reproductively.
Setting 1. Set the A4S or letter S media on the tray.
/procedure 2. Select [GRADATION] and press the Menu/Select key.
3. Select [PRINT] and press the Menu/Select key.
9.9.3

ALIGNMENT

A. TOP ADJUSTMENT
Function • Adjusts the top margin of media for single-sided printing.
• To correct a misaligned print image.
TRAY 1 to TRAY 4 : Adjust the head margin of plain paper fed from the tray1 to 4.
Use
THICK
DUPLEX
Setting 1. Select [TOP ADJUSTMENT] and press the Menu/Select key.
/procedure 2. Select desired tray or media type and press the Menu/Select key.
3. Select desired adjustment amount with the up key /down key
Menu/Select key.
B. LEFT ADJUSTMENT
Function • Adjusts the left margin of media for single-sided printing.
• To correct a misaligned print image.
LEFT ADJ TRAY 1 : Adjust the left margin of media fed from tray 1 (manual tray.)
LEFT ADJ TRAY 2 : Adjust the left margin of media fed from tray 2.
Use
LEFT ADJ TRAY 3 : Adjust the left margin of media fed from tray 3.
LEFT ADJ TRAY 4 : Adjust the left margin of media fed from tray 4.
LEFT ADJ DUPLEX : Adjust the left margin of duplex print media.
Setting 1. Select [LEFT ADJUSTMENT] and press the Menu/Select key.
/procedure 2. Select desired item and press the Menu/Select key.
3. Select desired adjustment amount with the up key /down key
Menu/Select key.
: Adjust the head margin of thick paper.
: Adjust the head margin of duplex print media.
-8 (-4.1 mm) to +7 (+3.6 mm) (1 step: 0.5 mm)
-8 (-4.1 mm) to +7 (+3.6 mm) (1 step: 0.5 mm)
9. Menu
and press the Menu/Select key.
and press the
and press the
131