Konica Minolta pagepro 5650EN Service Manual page 147

9. Menu
(17) SNMP
Function • To set whether to enable or disable SNMP setting.
YES : SNMP is enabled.
Use
NO : SNMP is disabled.
Setting • The default setting is YES.
/procedure
(18) WSD PRINT
Function • To set whether to use this printer as a WSD printer.
YES : WSD print is enabled.
Use
NO : WSD print is disabled.
Setting • The default setting is YES.
/procedure
(19) IPSEC
Function • To set whether to use IPsec protocol for IP network communication.
• When IPsec protocol is used to perform encrypted communication.
Use YES : IPsec is enabled.
NO : IPsec print is disabled.
Setting • The default setting is NO.
/procedure
(20) IP ADDRESS FILTER
<ACCESS PERMISSION>
Function • To set the IP filtering (access permission).
ENABLE : Access permission is enabled.
DISABLE : Access permission is disabled.
Use
NOTE
• The range for the IP addresses, to which access is enabled, is set using the
PageScope Web Connection.
Setting • The default setting is DISABLE.
/procedure
<ACCESS REFUSE>
Function • To set the IP filtering (access refuse).
ENABLE : Access refuse is enabled.
DISABLE : Access refuse is disabled.
Use
NOTE
• The range for the IP addresses, to which access is disabled, is set using the
PageScope Web Connection.
Setting • The default setting is DISABLE.
/procedure
112
"YES"
"YES"
YES
ENABLE
ENABLE
Field Service Ver. 1.0 Nov. 2007
NO
NO
"NO"
"DISABLE"
"DISABLE"