Operator Call Messages - Konica Minolta pagepro 5650EN Service Manual

8. Description of the control panel
8.2.2

Operator call messages

Message
Priority
LCD1
INCORRECT
High 1
TRAY
TONER
2
MISSING
3 COVER OPEN
4 PAPER JAM
10 TONER OUT
TRAYX SIZE
11
ERR
PAPER EMPTY
12
TRAYX EMPTY
84
LCD2/LCD3
An incorrect optional lower feeder unit is mounted.
• In this condition, key operation on the control panel is
TURN OFF disabled.
• This message is available only on the pagepro
5650EN.
CHECK TONER The toner cartridge is not installed.
TOP COVER The top cover of the machine is open.
REAR COVER The rear cover of the machine is open.
DUPLEX
The duplex door is open.
COVER *1
FINISHER
The finisher cover is open.
COVER *2
A media jam has occurred at the sub tray of the optional
SUB EXIT *2
offset tray.
FUSER/EXIT A media jam has occurred at the fusing section.
TRANSFER A media jam has occurred at the image transfer section.
A media jam has occurred at the duplex media feed
DUPLEX1 *1
section of the duplex.
A media jam has occurred at the duplex transport
DUPLEX2 *1
section of the duplex.
TRAY1 A media jam has occurred at tray 1.
TRAY2 A media jam has occurred at tray 2.
TRAY3 A media jam has occurred at tray 3.
TRAY4 A media jam has occurred at tray 4.
REPLACE
The toner cartridge has run out.
TONER
The media size set in the printer driver does not match
ADD
that of the media loaded in the specified tray.
SSSS *3
• Load "SSSS" size media in the specified tray.
• No specified media in trays 1 to 4.
SSSS *3 • Tray 3/4 is loaded with the specified media but is not
TTTT *3 set appropriately.
• Displays when [TRAY CHAINING] is set to [ON].
• No specified media in the specified tray or tray 3/4 is
SSSS *3
not set appropriately.
TTTT *3
• Displays when [TRAY CHAINING] is set to [OFF].
Field Service Ver. 1.0 Nov. 2007
Description