Konica Minolta pagepro 5650EN Service Manual page 137

9. Menu
D. TRAY 3/TRAY4
• It will be displayed only when the optional lower feeder unit(s) is installed.
(1) PAPER SIZE
Function • Sets the size of the media in tray 3/4.
Use • To specify the size of the media loaded in tray 3/4.
Setting 1. Select [PAPER SIZE] and press the Menu/Select key.
/procedure 2. Select desired paper size and press the Menu/Select key.
For North America
• The default setting is LETTER.
For other destinations
• The default setting is A4.
LETTER/LEGAL/EXECUTIVE/A4/A5/A6/B5(JIS)/B6(JIS)/GOVT LETTER/STATE-
MENT/FOLIO/SP FOLIO/UK QUARTO/FOOLSCAP/GOVT LEGAL/16K/KAI 16/KAI 32/
ENV C6/ENV DL/ENV MONARCH/ENV CHOU#3/B5(ISO)/ENV #10/ENV YOU#4/
JPOST/JPOST-D/CUSTOM
NOTE
• ANY specifies any media size.
• CUSTOM is used to set a "custom media size."
• The currently detected size is displayed if "AUTO" is set for [SIZE SETTING].
(2) CUSTOM SIZE
Function • Sets the custom size of media in tray 3/4.
Use • To specify the custom size media loaded in tray 3/4.
Setting 1. Select [CUSTOM SIZE] and press the Menu/Select key.
/procedure 2. Select [WIDTH] or [LENGTH] and press Menu/Select key.
3. Set desired number with the up key /down key
<For North America>
• The default setting of WIDTH is 8.50 inches.
WIDTH: 3.87 inches to 8.50 inches.
• The default setting of LENGTH is 11.00 inches.
LENGTH: 5.83 inches to 14.00 inches.
<For other destinations>
• The default setting of WIDTH is 210 mm.
WIDTH: 98 mm to 216 mm.
• The default setting of LENGTH is 297 mm.
LENGTH: 148 mm to 356 mm.
NOTE
• By changing the [UNIT OF MEASURE] setting (INCHES/MILLIMETERS), the
custom size units are changed.
102
Field Service Ver. 1.0 Nov. 2007
and press the Menu/Select key.