Operating Instructions; Connections; High Pressure Hose; Water Connection - Alto 30HA Standard Instruction Manual

3.0 Operating instructions

3.1 Connections

1.

High pressure hose

The high pressure hose with imprinted max. working pressure and temperature (150°C) should be attached
to outlet socket (1). The total length of the high pressure hose must not exceed 20 m.
2.

Water connection

Let water run through the inlet hose to remove any impurities. Clean all coupling parts of impurities. Attach
the water inlet hose to the quick coupling part (2) of the water inlet.
The water supply system must supply min. 720 l/h (12 l/min.).
If there is a risk of running sand in the inlet water (i.e. from your own well), a sand filter should be mounted.
Please contact your ALTO distributor for further information.
3.

Mains power connection

Check voltage, fuse, cables and extension cables according to section »2.1. Starting-up«.
6
Only use ALTO high pressure steam
hoses with an imprinted max. tempe-
rature of 150°C.
Max. length of extension hose: 10 m.
Min. length of hose: 6 m. ½".
Clean water inlet filter at monthly
intervals.
Max. water pressure 10 bar.
Only connect to an approved socket with
earth connection.
GB