Superior DRL6542TEN Installation And Operation Instructions Manual page 59

Innovative Hearth Products
DRL6500 Linear Direct-Vent Gas Fireplaces
Installing the glass door
1. Visually inspect the gasket on the backside of the glass door.
NOTE: The gasket surface must be clean, free of irregularities, and seated firmly. Ensure it is properly located.
Make sure the bead is not rolled into the channel at the top of the door, but remains flat against the top of the
glass.
2. While holding the glass door by the sides, hook the top edge onto the fireplace, and swing the bottom of the
glass door gently in towards the fireplace ensuring that the gasket seats evenly as the door draws shut.
NOTE: If the lower flange of the door does NOT clear the lower front frame of the fireplace, ensure the door
UPPER mounting flange is completely and properly engaged on the fireplace frame BEFORE INSERTING THE
SCREWS. Proper door alignment and sealing are important to the operation and performance of the fireplace.
Ensure the door seal is contacting the frame and that no air leaks are present.
3. Align the screw holes below the glass door with the holes in the fireplace, and secure using the three (3)
provided screws (Figure 50).
4. Install the barrier (Page 42).
Removing the glass door
1. Remove the barrier (Page 42).
2. Remove the three (3) screws beneath the door (Figure 50).
3. Swing the bottom of the glass door away from the fireplace to a 45° angle.
4. Carefully grip the door at the top and bottom, and remove it from the fireplace. Place the door in a safe location
for later reinstallation.
Figure 50 - Glass Door
Rating plate and lighting instructions
are attached to door bracket.
Installing the Optional bezel
1. Hook the bezel upper flange over the top edge of the glass door and swing the lower edge of the bezel toward the
door (Figure 51).
2. Gently push the lower edge of the bezel to attach the bezel lower flange to the lower edge of the glass door
(Figure 51).
Glass Door
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Figure 51 - Bezel (right side)
Bezel
Lower
Flange
Operation
900077-00, 07/2015
Bezel
Upper
Flange
59