Reset The Settings/Reboot The Camera [Default Reset] - Panasonic WV-SF330 Series Operating Instructions Manual

19 Maintenance of the camera [Maintenance]
The status of this camera can be checked on this page.
[Viewnetcam.com]
•
Server: The URL of the "Viewnetcam.com" service server will be displayed.
•
Status: The registration status for the "Viewnetcam.com" will be displayed.
•
Personal(Camera) URL: The URL of the camera registered for "Viewnetcam.com" will be displayed.
[UPnP]
•
Port number(HTTP), Port number(HTTPS)
SW115 SW115 SW152 SW152
displayed.
•
Status: The port forwarding status will be displayed.
•
Router global address: The global address of router will be displayed.
[Self check]
The self check result of the hardware will be displayed.
Note
•
Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further
information about the contents of the displayed statuses (relating to the "Viewnetcam.com" service,
the UPnP function, or the self check).
•
The displayed hardware items differ depending on the camera model.
19.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the "Maintenance" page. (®page 42, page 44)
202 Operating Instructions
: The port number that is set for UPnP port forwarding will be
SF135 SF135 SF132 SF132
SW355 SW355 SW352 SW352 SW316L SW316L SW316 SW316 SW314 SW314 SW155 SW155