Table of Contents
Advertisement
17 Maintenance of the camera [Maintenance]
The status of this camera can be checked on this page.
Viewnetcam.com
[Server]: The URL of the "Viewnetcam.com" service server will be displayed.
[Status]: The registration status for the "Viewnetcam.com" will be displayed.
[Personal(Camera) URL]: The URL of the camera registered for "Viewnetcam.com" will be displayed.
UPnP
[Port number(HTTP), Port number(HTTPS)]: The port number that is set for UPnP port forwarding will be
displayed.
[Status]: The port forwarding status will be displayed.
[Router global address]: The global address of router will be displayed.
Self check
[Hardware1]: The self check result of the hardware will be displayed.
Note
•
Refer to our website (http://security.panasonic.com/support/info/) for further information about the
contents of the displayed statuses (relating to the "Viewnetcam.com" service, the UPnP function, or
the self check).
17.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the "Maintenance" page. (®page 56, page 58)
192
Operating Instructions
Advertisement
Table of Contents
