Checking The Information Registered For The "Viewnetcam.com" Service; When Using "Dynamic Dns Update; When Using "Dynamic Dns Update(Dhcp) - Panasonic WV-SF330 Series Operating Instructions Manual

•
If access often fails due to the change in the global address of router, set a smaller value for "Access
interval".
17.4.4 Checking the information registered for the
"Viewnetcam.com" service
It is possible to check if the camera has been registered for the "Viewnetcam.com" service. (®page 201)

17.4.5 When using "Dynamic DNS Update"

[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•
Available number of characters: 3 - 250 characters
Enter in the form of "(host name). (domain name)".
•
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•
Default: None (blank)
Note
•
Refer to the network administrator for further information about the available host names.
[Access interval]
Select the interval to access the Dynamic DNS Update service server to check the IP address and the host
name from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h
•
Default: 24h

17.4.6 When using "Dynamic DNS Update(DHCP)"

[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•
Available number of characters: 3 - 250 characters
17 Configuring the network settings [Network]
Operating Instructions 189