Configure The Settings Relating To The Ftp Server [Ftp] - Panasonic WV-SF330 Series Operating Instructions Manual

•
Default: None (blank)
IMPORTANT
•
When entering the host name for "SMTP server address" or "POP server address", it is necessary to
configure the DNS settings on the [Network] tab of the "Network" page. (®page 163)
[Authentication]
•
Type
Select the authentication method to send E-mails from the following.
–
None: It is not necessary to clear any authentication to send E-mails.
–
POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.
–
SMTP: It is necessary to clear the SMTP server authentication to send E-mails.
–
Default: None
Note
•
When you don't know the authentication method to send E-mails, refer to the network administrator.
•
User name
Enter the user name to access the server.
–
Available number of characters: 0 - 32 characters
–
Unavailable characters: " & : ; \
–
Default: None (blank)
•
Password
Enter the password to access the server.
–
Available number of characters: 0 - 32 characters
–
Unavailable characters: " &
–
Default: None (blank)
[Sender's E-mail address]
Enter the E-mail address of a sender.
The entered E-mail address will be displayed in the "From" (sender) line of the sent E-mails.
•
Available number of characters: 3 - 128 characters
•
Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and
the hyphen (-).
•
Default: None (blank)
*1
SW355 SW355 SW352 SW352
16.2 Configure the settings relating to the FTP server
[FTP]
Click the [FTP] tab on the "Server" page. (®page 42, page 44)
SW316L SW316L SW316 SW316 SW314 SW314
16 Configure the settings of the servers [Server]
SW155 SW155 SW152 SW152 SF135 SF135 SF132 SF132 SW115 SW115
Operating Instructions 159