Panasonic WV-SF330 Series Operating Instructions Manual page 15

Refer to page 32 for further information about the log list and for how to play images on the SD memory
card.
Camera title
The camera title entered for "Camera title" on the [Basic] tab will be displayed. (®page 48)
Alarm occurrence indication button
This button will be displayed and will blink when an alarm has occurred. When this button is clicked, the
alarm output terminal will be reset and this button will disappear. (®page 28)
Full screen button
Images will be displayed on a full screen. To return to the "Live" page, press the [Esc] key. The aspect ratio
of displayed images will be adjusted in accordance with the monitor.
Snap shot button
Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the
image on the PC by selecting "Save" from the displayed pop-up menu.
When "Print" is selected, printer output is enabled.
Note
•
For the case of using windows 8, Windows 7 or Windows Vista, the following settings may be
required.
Open Internet Explorer, click [Tools] ® [Internet Options] ® [Security] ® [Trusted Sites] ®
[Sites]. Register the camera address on [Website] of the displayed trusted widows.
Mic input button
*6
SW355 SW355
SP302 SP302 NP502 NP502
Turns on/off the audio reception (hear audio from the camera on a PC). This button will be displayed only
when "Mic input", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for "Audio transmission/
reception" on the setup menu. (®page 130)
When this button is clicked, the button will turn into the
heard.
Audio volume can be adjusted (Low/ Middle/ High) by moving the volume cursor
Audio output button
*6
SP305 SP305 SP302 SP302 NP502 NP502
Turns on/off the audio transmission (play audio from the PC on the unit speaker). This button will be
displayed only when "Audio output", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for
"Audio transmission/reception" on the setup menu. (®page 130)
The button will blink during the audio transmission.
When this button is clicked, the button will turn into the
Audio output volume can be adjusted (Low/Middle/High) by moving the volume cursor
Note
•
When a user is using the audio transmission function with "Interactive(Half-duplex)" selected, the
receiver button and the transmission button will be inoperable for the other users. When
"Interactive(Full-duplex)" is selected, the transmission button is inoperable for other users.
•
Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have
passed, the audio transmission will automatically stop. To turn the audio transmission function on,
click the [Audio output] button again.
•
When the camera is restarted, the adjusted volume level (for both the audio transmission and
reception) will return to the level that had been set on the [Audio] tab on the setup menu.
(®page 130)
•
Actual volume level will change in three steps even though the volume cursor can be adjusted
minutely.
*5
SW352 SW352 SF346 SF346
SW355 SW355 SW352 SW352 SF346 SF346
SF342 SF342 SF335 SF335 SW316L SW316L
button and audio from the camera will not be
SF342 SF342 SF335 SF335
button and audio from the PC will not be heard.
1 Monitor images on a PC
SW316 SW316 SP306 SP306
.
SW316L SW316L SW316 SW316 SP306 SP306
.
Operating Instructions
SP305 SP305
15