Configure The Settings Relating To H.264 Recording [Alarm] (Sw355, Sw352, Sf346, - Panasonic WV-SF330 Series Operating Instructions Manual

•
Default: 5 Normal
*1
SW352 SW352 SF342 SF342
*2
SW355 SW355 SF346 SF346
NP502 NP502 SW115 SW115
13.3 Configure the settings relating to H.264
recording [Alarm] (SW355, SW352, SF346, SF342,
SF336, SF335, SF332, SW316L, SW316, SP306,
SP305, SP302, SW155, SW152, NP502, NW502S,
SW115)
Click the [Alarm] tab on the "Alarm" page. (®page 42, page 44)
The settings relating to the recording H.264 data on the SD memory card when an alarm is detected can be
configured on this page. To operate recording, it is necessary to configure the settings relating to SD memory
card and the video data. (®page 53)
H.264 recording (SD memory card)
[Pre alarm]
Determine whether or not to perform the pre alarm recording. When "Use" is selected, approx. 1 MB image
data is always saved during the pre alarm recording.
Use/ Not use
•
Default: Not use
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
10s/ 20s/ 30s/ 40s/ 50s/ 60s/ 120s/ 180s/ 240s/ 300s
•
Default: 30s
* The actual recording time may sometimes be longer than the duration selected for this setting.
[Recording (memory) size per an alarm]
The capacity of the SD memory card used to record video data upon an alarm occurrence. The actual capacity
may be different.
IMPORTANT
•
To record H.264 data, it is required to select "Use" for "SD memory card" on the [SD memory card] tab.
In addition, it is required to select "H.264" for "Recording format". (®page 53)
SP302 SP302 SW152 SW152
SF335 SF335 SW316L SW316L SW316 SW316
13 Configure the alarm settings [Alarm]
SW314 SW314 SP306 SP306 SP305 SP305 SW155 SW155 SF135 SF135 SP105 SP105
Operating Instructions 139