Panasonic WV-SF330 Series Operating Instructions Manual page 203

The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed
on this page.
[Reset to the default (Except the network settings)]
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Load the default HTML files (setup menu).]
Click the [Execute] button to reset the HTML files to the default.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Reset to the default and load the default HTML files.]
Click the [Execute] button to reset the settings of the camera and the HTML files to the default. Note that the
network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Reboot]
Click the [Execute] button to reboot the camera. It is impossible to operate the camera for about 2 minutes
after rebooting the camera.
Note
•
To initialize the network settings (®page 163), turn off the power of the camera, then turn on the power
again while holding down the [INITIAL SET] button on the unit, and keep the [INITIAL SET] button held
down for about 5 seconds. Wait about 3 minutes after releasing the button. The camera will start up
and the settings including the network settings will be initialized. Do not turn off the power of the unit
about 3 minutes after turning on the power.
SW355 SW355 SW352 SW352
SW152 SW152 NP502 NP502
•
The notification function allows users to provide the notification of the error to the specified "Destination
E-mail address" and "Destination server address" when an error such as no SD memory card insertion
after the reboot or a locked SD memory card insertion occurs. (®page 145, page 147)
SF346 SF346 SF342 SF342 SF335 SF335
:
SW115 SW115
19 Maintenance of the camera [Maintenance]
SW316L SW316L SW316 SW316 SP306 SP306 SP305 SP305 SP302 SP302 SW155 SW155
Operating Instructions 203