Monitor Images On A Mobile Terminal - Panasonic WV-SF330 Series Operating Instructions Manual

2 Monitor images on a cellular phone/mobile terminal
"https://IP address: (colon) + port number/mobile" or "https://Host name registered in the DDNS server:
(colon) + port number/mobile"
*1 IP address is the global WAN IP address of the router that can be accessed via the Internet.
*2
When "User auth." is set to "On" (®page 153), only users with the access level of "1. Administrator" or "2. Camera control" will be
displayed.

2.2 Monitor images on a mobile terminal

It is possible to connect to the camera using a mobile terminal via the Internet and monitor images (MJPEG
only) from the camera on the screen of the mobile terminal. It is also possible to refresh images to display the
latest image.
The compatible mobile terminals are shown as follows. (As of February, 2013)
–
iPad, iPhone, iPod touch (iOS 4.2.1 or later)
–
Android™ mobile terminals
When an Android terminal is used, an MJPEG format image is displayed by the Firefox
format image is displayed by the standard browser.
For further information about compatible devices, refer to our website
(http://security.panasonic.com/pss/security/support/info.html).
IMPORTANT
•
When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user "admin". (®page 153)
Note
•
It is necessary to configure the network settings of the mobile terminal in advance to connect to the
Internet and monitor images from the camera. (®page 163)
20 Operating Instructions
browser, but a JPEG
®