Remote Control - Mitsubishi PD-4265 Owner's Manual

Remote Control

SLEEP
ADJUST
INPUT 1
INPUT 2
INPUT 3
q POWER ON/STANDBY
Switches the power to ON or STANDBY mode.
w SLEEP
Press this button to activate the off timer.
e INFO
Displays the source settings on the screen.
r FORMAT
Automatically detects the signal and sets the aspect
ratio. FORMAT button is not active for all signals.
t MENU/ENTER
Press this button to access the Menu.
Press this button during the display of the main menu
to go to the sub menu.
INFO
FORMAT
DEVICE
COMP 1
COMP 2
MONLINK
y ADJUST (▲ / ▼ /
Use these buttons to select items or settings and to
adjust settings or switch the display patterns.
u EXIT
Press this button to exit the MAIN MENU. Press this
button during the display of the sub menu to return to
the previous menu.
i MUTE
Press this button to mute the audio.
o VOLUME (
)
Press this button to adjust audio volume.
!0 ZOOM (
)
Press this button to enlarge or reduce the image.
!1 CONTRAST
Press this button to adjust contrast directly.
!2 BRIGHTNESS
Press this button to adjust brightness directly.
!3 PICTURE MODE
Press this button to adjust picture mode directly.
!4 COLOR TEMP
Press this button to adjust color tone directly.
!5 INPUT1, 2, 3
Press one of these buttons to select INPUT1 or INPUT2
or INPUT3 as the source.
INPUT 1-3 can also be selected using the INPUT/EXIT
button on the front panel of the display.
!6 COMP1, 2
Press one of these buttons to select COMP1 or COMP2
as the source.
COMP 1-2 can also be selected using the INPUT/EXIT
button on the front panel of the display.
!7 MONLINK
Press this button to select MONLINK/HDMI as the
source.
!8 PC/RGB
Press this button to select PC/RGB as the source. PC/
RGB can also be selected using the INPUT SELECT
button on the display.
!9 PICTURE MEMORY
Switches sequentially between picture memory settings
1 to 6
@0 Remote control signal transmitter
Transmits the remote control signal
4
/ )