Table of Contents
Advertisement
Parts Name and Func tions (c o ntinued)
1
2
3
4
5
6
7
8
9
10
1
POWER butto n
Switches the power on/off.
*
When the Power indicator is not glowing, no controls will
work.
2
INPUT butto ns
Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D),
[RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO<S>],
and [VIDEO].
NOTE:
The [CAT5] and [DISPLAY PORT] buttons don t work.
3
PICTURE MODE butto n
Selects the picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], and [CINEMA]. See page 26.
HIGHBRIGHT : The brightness is maximized.
STANDARD:
Factory default setting.
sRGB:
Suitable for color matching with sRGB-
compliant devices.
CINEMA:
Suitable for viewing movies.
4
DISPLAY butto n
Displays the screen information. See page 42. When the remote
control mode is LOCK, you can set it back to NORMAL by
holding down the DISPLAY button for at least 5 seconds (see
page 39).
5
SET butto n
Accepts the settings made in the OSD menu.
6
MINUS butto n (-)
Acts as (-) button to decrease the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the left.
7
AUTO SETUP butto n
Displays the auto setup menu. See pages 26 and 35.
Wireless Remote Control
8
Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3], and
[HDMI]. However, note that [VIDEO<S>] and [VIDEO] use
common settings. You can select [HDMI] only when the video
input source is [RGB1].
9
ON/OFF button: Switches the PIP or POP mode on/off.
11
INPUT button:
12
13
CHANGE button: Changes the main picture with the sub
14
15
[Desc riptio n]
16
PIP: Picture-in-Picture
17
POP: Picture-out-Picture
18
SIDE BY SIDE
NOTE:
When the screen size is [CUSTOM] or [REAL], the PIP and POP
modes don t work.
10
ON/OFF button:
CAPTURE button: Captures the new picture.
11
Selects the picture size from [FULL], [NORMAL], [CUSTOM],
[DYNAMIC], and [REAL]. See page 42.
12
Switches the OSD menu mode on/off.
13
Acts as
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture up.
14
Acts as (+) button to increase the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the right.
15
Displays the previous OSD menu.
16
Acts as
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture down.
17
Switches the mute function on/off.
18
Pressing the plus (+) side increases the audio output level.
Pressing the minus (-) side decreases the audio output level.
English-10
AUDIO INPUT butto ns
PIP (Pic ture-in-Pic ture) butto ns
Selects video to be displayed in the sub
picture.
picture.
The sub picture is displayed within the main picture.
The sub picture is displayed to the bottom right of the main
picture.
The main picture and the sub picture are displayed side by
side.
STILL butto n
Switches the still picture mode on/off.
SIZE butto n
MENU butto n
UP butto n (
)
button to move the highlighted area up to select
PLUS butto n (+)
EXIT butto n
DOWN butto n (
)
button to move the highlighted area down to select
MUTE butto n
VOLUME butto ns (VOL)
Advertisement
Table of Contents
