Mitsubishi PD-4265 Owner's Manual page 37

PEAK BRIGHT
Use this to activate the brightness limiter.
Example: Setting "PEAK BRIGHT" to "75%"
Follow the instructions given in the "Reducing burn-in of
the screen" section.
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select PEAK BRIGHT setting.
Use the buttons to change PEAK BRIGHT setting.
LONGLIFE
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SOFT FOCUS
ORBITER MENU
MENU CONTRAST
SEL. ADJ.
Information
PEAK BRIGHT settings
100%: The brightness of the screen is adjusted
automatically to suit the picture quality.
75%, 50%, 25%: Sets maximum brightness.
The brightness level decreases in the order of 75%,
50%, 25%. 25% provides minimum brightness.
* These values are approximate.
ORBITER
Use this to set the picture shift.
Example: Setting "ORBITER" to "AUTO1"
Follow the instructions given in the "Reducing burn-in of
the screen" section.
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select ORBITER setting.
Use the buttons to turn the ORBITER on or off.
LONGLIFE
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SOFT FOCUS
ORBITER MENU
MENU CONTRAST
SEL. ADJ.
Information
ORBITER settings
OFF: Orbiter mode is turned off.
This is the default setting when RGB is input.
AUTO1: The picture moves around the screen
intermittently, making the picture smaller. This is the
default setting when a Video or a DVD/HD/DTV signal
is input. Set to "OFF" when these signals are not used.
AUTO2: The picture moves around the screen
intermittently, making the picture bigger.
* When a Video or a DVD/HD/DTV signal is input, the
AUTO1 and 2 functions will affect only the moving
picture and will not make the screen smaller or bigger.
: 75%
: OFF
: OFF
: OFF
: ON
: LOW
EXIT RETURN
: 100%
: AUTO1
: OFF
: OFF
: ON
: LOW
EXIT RETURN
INVERSE/WHITE
Use this to set the inverse mode or to display a white screen.
Example: Setting "INVERSE/WHITE" to "WHITE"
Follow the instructions given in the "Reducing burn-in of
the screen" section.
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select INVERSE/WHITE setting.
Use the buttons to change the INVERSE/WHITE
setting.
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SOFT FOCUS
ORBITER MENU
MENU CONTRAST
SEL. ADJ.
Information
INVERSE/WHITE Settings
OFF: INVERSE/WHITE mode is turned off.
INVERSE: The picture is displayed alternately
between positive image and negative image.
WHITE: The entire screen turns white.
SOFT FOCUS
Reduces edges and softens the image.
Example: Setting "SOFT FOCUS" to "LEVEL2"
Follow the instructions given in the "Reducing burn-in of
the screen" section.
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select SOFT FOCUS setting.
Use the buttons to change the SOFT FOCUS setting.
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SOFT FOCUS
ORBITER MENU
MENU CONTRAST
SEL. ADJ.
Information
SOFT FOCUS settings
OFF: Turns the SOFT FOCUS function off.
LEVEL1, 2, 3, 4: Activates the SOFT FOCUS setting.
The higher numbers create a softer image.
"SHARPNESS" can not be adjusted
"PICTURE" menu.
28
LONGLIFE
: 100%
: OFF
: WHITE
: OFF
: ON
: LOW
EXIT RETURN
LONGLIFE
: 100%
: OFF
: OFF
: LEVEL2
: ON
: LOW
EXIT RETURN
on the