Audio Settings Menu; Adjusting The Treble, Bass And Left/Right Balance And Audio Input Select; Selecting The Input Of The Audio Connectors; Monitorlink - Mitsubishi PD-4265 Owner's Manual

Audio Settings Menu

Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
Press MENU/ENTER button to access MAIN MENU.
▲ ▼ buttons to select the AUDIO menu and
Use the
then press the MENU/ENTER button.
Use the ▲ ▼ buttons to select the BASS setting.
Use the buttons to decrease or increase BASS level.
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3

MONITORLINK

SEL. ADJ.
Note : If "CAN NOT ADJUST" appears...
Set "AUDIO INPUT" on the AUDIO menu correctly.
Information
Audio settings menu
BASS: ............. Controls the level of low frequency
sound.
TREBLE: Controls the level of high frequency sound.
BALANCE: Controls the balance of the left and right
channels.

Selecting the Input of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting "AUDIO INPUT1" to "VIDEO 2"
Press MENU/ENTER button to access MAIN MENU.
▲ ▼ buttons to select the AUDIO menu and
Use the
then press the MENU/ENTER button.
Use the ▲ ▼ buttons to select the appropriate AUDIO INPUT
(1-3).
Use the buttons to select the appropriate input source.
The available sources depend on input settings.
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
MONITORLINK
SEL. ADJ.
Information
AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
MONITORLINK
ON: Enables the digital audio input signal transmitted
via the MONITORLINK CONTROL.
OFF: Disables the digital audio input signal.
AUDIO
: INPUT1
: COMP1
: PC/RGB
: ON
EXIT RETURN
AUDIO
: INPUT2
: COMP1
: PC/RGB
: ON
EXIT RETURN

Image Adjust Settings Menu

Adjusting the Position, Size, Fine Picture, Picture Adj

The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position in the normal mode
Press MENU/ENTER button to access MAIN MENU.
▲ ▼ buttons to select the IMAGE ADJ. menu
Use the
and then press the MENU/ENTER button.
NARROW ↔ STANDARD
* The mode can also be switched by pressing the FORMAT
button on the remote control.
* The settings on the IMAGE ADJUST menu are not preset
at the factory.
IMAGE ADJUST
ASPECT MODE : NORMAL
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE : OFF
FINE PICTURE
PICTURE ADJ.
SEL. ADJ.
EXIT RETURN
Information
When "AUTO PICTURE" is "OFF"
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SEL. ADJ.
When Auto Picture is off, the Fine Picture and the
Picture ADJ. items are displayed so that you can adjust
them.
Adjusting the Auto Picture
ON: The PICTURE ADJ., FINE PICTURE and Position
adjustments are made automatically.
Not available for digital ZOOM.
OFF: The PICTURE ADJ., FINE PICTURE and
Position adjustments are made manually.
* If FINE PICTURE can't be adjusted, set AUTO
PICTURE to OFF and adjust manually.
Adjusting the position of the image
V-POSITION: Adjusts the vertical position of the
image.
H-POSITION: Adjusts the horizontal position of the
image.
V-HEIGHT: Adjusts the vertical size of the image.
(Except for STRETCH mode)
H-WIDTH: Adjusts the horizontal size of the image.
(Except for STRETCH mode)
FINE PICTURE*: Adjusts for flickering.
PICTURE ADJ.*: Adjusts for striped patterns on the
image.
* The PICTURE ADJ. and FINE PICTURE features are
available only when the "AUTO PICTURE" is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are available only for RGB signals.
These features are not available for moving pictures on
INPUT, COMP or RGB.
22
V-POSITION
IMAGE ADJUST
: STANDARD
: OFF
EXIT RETURN
-30