Signal Information Menu; Checking The Frequencies, Polarities Of Input Signals, And Resolution - Mitsubishi PD-4265 Owner's Manual

ORBITER MENU
Use this to set menu shift.
Example: Setting "ORBITER MENU" to "OFF"
Follow the instructions given in the "Reducing Burn-in
of the screen" section.
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select ORBITER MENU setting.
Use the buttons to turn the ORBITER MENU on or off.
LONGLIFE
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SOFT FOCUS
ORBITER MENU
MENU CONTRAST
SEL. ADJ.
Information
ORBITER MENU settings
ON: The position of the menu will be shifted by eight
dots each time the menu is displayed.
OFF: The menu will be displayed at the same position.
MENU CONTRAST
Use this to reduce the brightness of the menu.
Example: Setting "MENU CONTRAST" to "NORMAL"
Follow the instructions given in the "Reducing Burn-in
of the screen" section.
Bring up the LONGLIFE menu.
Use the ▲ ▼ buttons to select MENU CONTRAST
setting.
Use the buttons to change the MENU CONTRAST
setting.
LONGLIFE
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SOFT FOCUS
ORBITER MENU
MENU CONTRAST
SEL. ADJ.
Information
MENU CONTRAST settings
NORMAL: Menu brightness is set to normal.
LOW: Menu brightness is set to lower.
: 100%
: OFF
: OFF
: OFF
: OFF
: LOW
EXIT RETURN
: 100%
: OFF
: OFF
: OFF
: ON
: NORMAL
EXIT RETURN

Signal Information Menu

Checking the frequencies, polarities of input
signals, and resolution
Use this function to check the frequencies and polarities
of the signals currently being input from a computer, etc.
On "MAIN MENU", select "SIGNAL INFO.", then press
the MENU/ENTER button.
The "SIGNAL INFORMATION" is displayed.
SIGNAL INFORMATION
H. FREQUENCY
V. FREQUENCY
H. POLARITY
V. POLARITY
MEMORY
RESOLUTION
SEL. ADJ.
PC: MEMORY will be displayed.
Others: MODE will be displayed.
29
: 48.4KHz
: 60.0Hz
: NEGATIVE
: NEGATIVE
: 24
: 1024 768
EXIT RETURN