Cable Management for PD-5065
Cable Management Cover assembly
Cable Management
Depending on cable thickness and number of cables,
the Cable Management Cover might not close.
In this case, please remove the Cable Management Cover.
When Cable Management Cover is removed, please fasten
cables to back panel using attached Clamp.
To attach
1.
2.
clamp
mounting hole
Push in the cables.
Align the cables
to inside of
support.
To attach
1.
Clamp is
attached.
Support is attached.
To attach
1.
To detach
cables
10
2.
3.
2.
3.
4.
mounting holes
Align the
cables, and close
the clamp.