Using Configuration Assistant; Changing Your Station Passcode - Mitel 8528 User Manual

Using Configuration Assistant

If Configuration Assistant is enabled for your system, you can access this voice guided
configuration portal that provides easy-to-use, remote access to the following phone
configuration options:




NOTE

Changing Your Station Passcode

Before using Configuration Assistant, Mitel recommends that you change your default station
(telephone) passcode to something more secure.
To change your station passcode:
1. Dial 392. ENTER PASSCODE appears.
2. Enter your current passcode (the default passcode is your extension number), followed
3. Enter the new passcode followed by #. VERIFY PASSCODE appears.
4. Enter the new passcode again followed by #. DATABASE UPDATED appears.
To change the passcode from another phone, see "Changing the Station Passcode" on
Mitel ® 8528 Telephone User Guide – Issue 3, February 2011
Dynamic Extension Express (see
DND (see page 49)
Manual Call Forwarding (see
Meet-Me Conferencing (see
You need a Configuration Assistant extension number to use this feature. Contact
your system administrator for more information.
by #. CHANGE PASSCODE TO appears.
page 48)
page 49)
page 50)
Call Features
page 53.
Page 47