Call Features
Using Configuration Assistant
If Configuration Assistant is enabled for your system, you can access this voice guided
configuration portal that provides easy-to-use, remote access to the following phone
configuration options:
NOTE
Changing Your Station Passcode
Before using Configuration Assistant, Mitel recommends that you change your default station
(telephone) passcode to something more secure.
To change your station passcode:
1. Dial 392. ENTER PASSCODE appears.
2. Enter your current passcode (the default passcode is your extension number), followed
3. Enter the new passcode followed by #. VERIFY PASSCODE appears.
4. Enter the new passcode again followed by #. DATABASE UPDATED appears.
To change the passcode from another phone, see "Changing Your Station Passcode" on
page
Page 46
Dynamic Extension Express (see
DND (see
page
48)
Manual Call Forwarding (see
Meet-Me Conferencing (see
You need a Configuration Assistant extension number to use this feature. Contact
your system administrator for more information.
by #. CHANGE PASSCODE TO appears.
52.
page
50)
page
48)
page
49)
Mitel
®
8520 Telephone User Guide – Release 6.2, June 2016