Using Configuration Assistant; Changing Your Station Passcode - Mitel MiVoice Office 250 User Manual

Call Features

Using Configuration Assistant

If Configuration Assistant is enabled for your system, you can access this voice guided
configuration portal that provides easy-to-use, remote access to the following phone
configuration options:




NOTE

Changing Your Station Passcode

Before using Configuration Assistant, Mitel recommends that you change your default station
(telephone) passcode to something more secure.
To change your station passcode:
1. Dial 392. ENTER PASSCODE appears.
2. Enter your current passcode (the default passcode is your extension number), followed
3. Enter the new passcode followed by #. VERIFY PASSCODE appears.
4. Enter the new passcode again followed by #. DATABASE UPDATED appears.
To change the passcode from another phone, see "Changing the Station Passcode" on
Page 48
Dynamic Extension Express (see
DND (see page 50)
Manual Call Forwarding (see
Meet-Me Conferencing (see
You need a Configuration Assistant extension number to use this feature. Contact
your system administrator for more information.
by #. CHANGE PASSCODE TO appears.
page 49)
page 50)
page 51)
Mitel ® 8528 Telephone User Guide – Release 6.2, June 2016
page 54.