Inter-Tel 8500 User Manual page 4

P A C
LACING
While on the first call, press
1.
Place an intercom or outside call, then press the flashing
2.
place the call on hold. (If necessary, repeat this step to place a third call on
hold.)
Press the flashing
3.
ference.
NOTE:
Conference calls are limited to three parties on SIP endpoints.
F
ORWARDING
Press . (Six-line display model users must then select a menu button.)
1.
FWD
Do one of the following:
2.
• To forward to an outside telephone number: Select an outside line
and dial a telephone number.
• To forward to an extension number: Dial the extension number.
• To forward to your voice mailbox: Dial the voice mail extension.
To cancel call forwarding:
.
Press
1.
FWD
If you have a six-line display endpoint, press the
2.
If you have a non-display or two-line display endpoint, press
lift and replace the handset.
R
ESPONDING TO A
If you hear a "call waiting" tone through your handset or headset, either end
your current call or place it on hold. Then press
flashing button.
C V
HANGING OLUME
EITHER, Press the high (
OR, Press the Up or Down arrow on the Volume button.
OR, Press the
To save your change:
EITHER, Press both ends of the Volume button at the same time.
OR, Press the middle of the Volume button.
OR, Press both
R N
EDIALING A
Select an outside line and press
matically dialed.
C
ONFERENCE
CNF
button to join all of the calls together in the con-
CNF
C
ALLS
W
AITING
L
EVELS
) or low (
or
VOL UP VOL DN
and
VOL UP VOL DN
UMBER
REDIAL
ALL
. The call is now on hold.
C
ALL
)
end of the Volume button.
button.
buttons at the same time.
or dial
3
2
CNF
menu button.
FWD OFF
,
, ,
SPKR ANSWER
. The number is auto-
8 0
button to
, or
SPKR
, or the