P
ROGRAMMING
If you are away from your desk and forgot to put your endpoint in DND, don't worry.
With the Remote Feature Access, you can place your endpoint in DND or forward
calls from any other endpoint on the system. And, if you have a special dial-up line,
you can access your endpoint features from an outside line.
NOTE:
For your convenience, a pocket-sized guide of the Remote Feature Access is
located in the front of this guide.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your endpoint:
Dial
1.
Enter your current password, followed by
2.
NOTE:
Enter the new password followed by
3.
Enter the new password again for verification followed by
4.
firmation tone.
To change the station password using remote programming, see
Access.
®
Inter-Tel
Model 8500 User Guide
R
F
EMOTE
EATURE
.
3
9
2
Your extension number is your password at default.
A
CCESS
.
#
. You hear a confirmation tone.
#
#
. You hear a con-
Remote Feature
61