Language Setting; Advanced Menu Settings - Panasonic WV-CW590G Operating Instructions Manual

3. Use the joystick to move the cursor the character you
want to input, and then press the CAM (SET) button.
The text input procedure is the same as that for
camera ID input.
See steps 3 through 5 under "Camera ID Settings"
on page 5 for information about inputting the text for
the preset ID and specifying its position on the
display.
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+- * /%$
SPACE
COPY POSI RET RESET
FLOOR..........
To copy the preset ID of another position number
Move the cursor to COPY, and then press the CAM
(SET) button. This displays the preset ID of the
position number preceding the one you are
currently configuring. Each press of the CAM (SET)
button scrolls back to the next sequential position
number and displays its preset ID.
Notes:
• When setting the preset ID, the camera ID will be
displayed above the preset ID. The preset ID
position has priority over other positions.
• Whether the camera ID is set to Open or Close,
camera ID will be displayed.
Whether or not the camera ID is set, when preset
ID is displayed, the camera ID will also be
displayed, but this only applies within the present
channel.
n Language Setting
1. Move the cursor to LANGUAGE
the CAM (SET) button.
2. On the 8-language selection menu that appears,
select the language you want to use.
The factory default setting is English.
* All of the example screens in these Operating
Instructions show English display messages.
3. Move the cursor to SET, and then press the CAM
(SET) button.
* The item that was set flashes when the language is
being changed and stops flashing when the
language has been changed. Do not operate the
system controller when changing settings.
* The "LANGUAGE" display remains in English even
when the language setting is changed.
8
n Advanced Menu Settings
The advanced setup menu can be displayed from the
setup menu.
Refer to the pages below for details of setup menu
items.
1 CAMERA
2 PAN/TILT
3 ALARM
4 SPECIAL
5 COMMUNICATION*
6 SCENE SELECT
7 LANGUAGE
8 QUICK SETUP
9 PASSWORD LOCK
* This item appears only when RS485 settings are
, and then press
1. Display the setup menu (page 5), move the cursor
to → ADVANCED SETUP, and then press the CAM
(SET) button.
This will display the advanced setup menu.
MODEL
CAMERA
PAN/TILT
ALARM
SPECIAL
COMMUNICATION
SCENE SELECT
LANGUAGE
→ QUICK SETUP
PASSWORD LOCK OFF
ALL items can be set on the advanced setup menu.
To switch back to the quick setup menu from the
detailed menu, move the cursor to →QUICK SET
UP, and then press the CAM (SET) button.
configured with the DIP switches.
WV-CW590 SERIES
1
2
3
4
5
6
7
8
9
Camera settings Page 9
Pan/tilt settings Page 14
Alarm settings Page 22
Special settings Page 25
RS485 setup Page 4
Scene select settings
Page 6

Language setting

This page
About the setup menus
Page 5
Password settings
Page 27