Panasonic WV-CW590G Operating Instructions Manual page 16

3 Home Position Setting (HOME POSITION)
A currently configured preset position can be
designated as the home position.
Pressing the HOME button of the system controller will
cause the camera to move to the currently specified
home position. Use the following procedure to make a
preset position the home position.
The factory default setting is OFF.
1. Move the cursor to HOME POSITION, and then tilt
the joystick left or right to select the position
number of the preset position you want to make the
home position.
This causes the preset position whose position
number you select to become the home position. If
you do not want to use the home position function,
select OFF for the HOME POSITION setting.
4 Self Return Setting (SELF RETURN)
The self return setting can be used to specify automatic
return to a particular mode if a certain amount of time
elapses without any operation being performed.
1. Move the cursor to SELF RETURN, and then tilt the
joystick left or right to select a self return trigger setting.
Tilting the joystick cycles through the self return
display in the sequence shown below. (unit: sec, min)
The factory default setting is OFF.
OFF ↔ 1S ↔ 2S ↔ 3S ↔
60MIN
↔ ↔
30MIN 20MIN 10MIN
2. If you selected any setting other than OFF in step 1,
press the CAM (SET) button and then tilt the joystick
left or right to select a self return mode.
OFF ↔ AUTO ↔ HOME ↔ APAN ↔ SEQ ↔ SORT
TRK ↔ PTR4 ↔ PTR3 ↔ PTR2 ↔ PTR1
OFF : In the auto mode, exits the auto mode
when the trigger time elapses.
AUTO : Auto mode setting not OFF, returns to
the auto mode when the trigger time
elapses, auto mode setting OFF,
returns to the home position when the
trigger time elapses.
: Returns to the home position when the
HOME
trigger time elapses.
: Activates autopan when the trigger
APAN
time elapses.
: Activates the sequence function when
SEQ
the trigger time elapses.
: Activates the sort function when the
SORT
trigger time elapses.
PTR 1 to 4 : Activates the patrol function when the
trigger time elapses.
TRK : After the trigger time elapses, the
camera returns to the home position
and then automatic tracking starts.
Following that, after a set time, the
camera returns to the home position
and star ts to continue automatic
tracking.
The factory default setting is AUTO.
16
.......
↔ 10S ↔ 20S ↔ 30S ↔ 40S
↔ ↔ ↔ ↔
5MIN 3MIN 2MIN
Notes:
• The HOME setting should be selected when you
want to normally leave the camera in the home
position and occasionally perform pan and tilt, or
when you want to activate SEQ.
• PTR1-4 displays only the set number of patrol
routines (page 17).
5 Auto Mode Setting (AUTO MODE)
Use the auto mode setting to specify the camera
movement mode (OFF, SEQ, SORT, AUTOPAN,
PATROL 1~4, AUTOTRACK).
After selecting AUTOPAN, you can use the AUTOPAN
setting menu to configure detailed settings.
1. Move the cursor to AUTO MODE, and then tilt the
joystick left or right to select a camera movement
mode setting.
OFF : Manual movement only
SEQ : Sequentially switches between preset
positions in position number sequence.
(sequential movement)
SORT : Sequentially switches between preset
positions counterclockwise, starting from the
camera home position. (sort movement)
AUTOPAN : Camera pans automatically within the
range specified by PAN. Selecting AUTOPAN
and pressing the CAM (SET) button will display
the AUTOPAN setting menu, which can be used
for configuring detailed settings. (page 17)
50S
PAT RO L 1 t o 4 : Operates the camera in
accordance with patrol function settings.
1MIN
AUTOTRACK : Auto tracking is done for moving
objects under the following conditions.
The moving object must be larger than one
of the screen blocks (1/48 of screen area), it
must have 5 % comparative contrast with
the background image.
The factory default setting is OFF.
Tilting the joystick cycles through settings in the
sequence shown below.
OFF ↔ SEQ ↔ SORT ↔ AUTOPAN ↔ PATROL1 ↔ PATROL2
AUTOTRACK ↔ PATROL4 ↔ PATROL3
Notes:
• Automatic tracking covers a range from horizontal to
directly below the camera. The digital flip function
(page 20) does not operate. Also, the pan range can
be limited by using the PAN LIMIT setting (page 17).
• The automatic tracking function incorporated in this
system easily tracks moving objects on screen.
Moving subjects are not automatically tracked in the
following situations.
• When multiple moving subjects are on screen
• When the subjects are moving very fast
• When the image is dark
• When the subject has little contrast
• When moving objects are either large or small
• When the image flickers
• Auto mode is the mode currently in operation.
Auto mode is automatically adjusted when
changes are made to the operation or other
settings using the system controller.
• AUTO MODE: Should be the mode currently in operation.
• Pressing the AUTOPAN button from the controller
should change AUTO MODE to the value of
AUTOPAN KEY.