Table of Contents
Advertisement
About the setup menus
This manual describe procedures for operating system
controller WV-CU650.
All setting configuration procedures start from the setup
menu. This section explains how to display the setup
menu and provides details about the menu items that it
contains.
n Displaying the Setup Menu
l When using the WV-CU650
(1) Select the camera (this camera), and the
monitor where displays the setup menu.
(2) Press the MENU button to display LCD MENU
CAM 101.
(3) Press the ENTER button or CAM (SET) button to
display CAMERA SETUP.
(4) Press the F1 button.
MODEL
WV-CW590 SERIES
CAMERA ID
SCENE SELECT
PRESET POSITION
LANGUAGE
→ ADVANCED SETUP
Refer to the pages below for details.
1 CAMERA ID
2 SCENE SELECT
3 PRESET POSITION
4 LANGUAGE
5 ADVANCED SETUP
Note:
• The setup menus here are quick setup menus.
n Camera ID Settings
The camera ID is a series of alphanumeric
characters that indicate the location of the camera.
This item can be used to turn display of the camera
ID on the monitor screen on or off, and to input the
camera ID.
1. Move the cursor to CAMERA ID, and then tilt the
joystick left or right to toggle camera ID display ON
and OFF.
2. Select ON or OFF, and then press the CAM (SET)
button.
The factory default setting is OFF.
1
OFF
2
3
4
5
Camera ID Settings This page
Scene Select Settings Page 6
Preset Position Settings Page 6
Language Setting Page 8
Advanced Menu Settings Page 8
3. Use the joystick to move the cursor the character
you want to input, and then press the CAM (SET)
button.
This will cause the selected character to appear in
the camera ID input area. Repeat step 3 as many
times as necessary to input all of the characters for
the camera ID. (Example: DOOR)
To input a blank space
Move the cursor to SPACE, and then press the CAM
(SET) button.
To delete all previously input characters
Move the cursor to RESET, and then press the CAM
(SET) button.
To change previously input characters
Use the joystick to move the cursor to the camera
ID input area. Next, tilt the joystick left and right to
move the ↑ pointer to the character you want to
change. Finally, use step 3 above to input the new
character.
CAMERA ID. ---
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+- * /%$
SPACE
---- POSI RET RESET
DOOR............
Camera ID Input area
4. Move the cursor to POSI, and then press the CAM
(SET) button.
This will display the ID position setting menu.
5. Use the joystick to select a camera ID display
position, and then press the MON (ESC) button.
This registers the camera ID display position and
returns to the camera setting menu.
DOOR
5
Hide quick links:
Advertisement
Table of Contents
