Language Setting; Quick Setup; Password Lock Setting - Panasonic WV-CZ392E: WV-CZ492E Operating Instructions Manual

Color cctv camera
Table of Contents

Advertisement

AGC SENS UP SHUTTER
INDOOR (L) MID
INDOOR (H) HIGH X2 AUTO OFF
OUTDOOR (L) MID
OUTDOOR (H) HIGH X2 AUTO AUTO
BW
INDOOR (L) OFF
INDOOR (H) OFF
OUTDOOR (L) AUTO LOW
OUTDOOR (H) AUTO HIGH
2. Move the cursor to "LOAD", and then
press the [SET] button.
This will cause the setup you selected for
SCENE in step 1 to be applied to the image.
 Language setting
1. Move the cursor to "LANGUAGE", and
then press the [SET] button.
**LANGUAGE SETUP**
LANGUAGE
SET
RET TOP
2. On the 8-language selection menu that
appears, select the language you want to
use. The factory default setting is English.
3. Move the cursor to "SET", and then press
the [SET] button.
The item that was set flashes when the
language is being changed and stops
flashing when the language has been
changed. Do not operate the system
controller when changing settings.
After switching the language, the title
set in the former language will be
disappeared.
If you have selected Japanese as the
language, only the IDs and titles can be
set in katakana.
The LANGUAGE display remains in
English even when the language setting
is changed.
OFF
OFF
OFF
AUTO
DNR
WHITE BAL
LOW
ATW1
HIGH
ATW1
ATW2
ATW2
ENGLISH
 Quick setup
Move the cursor to "→ QUICK SETUP", and press
the [SET] button. Quick setup menu appears.
More information, please refer to settings on
page 21.
 Password lock setting
Note:
• For security, do not operate your VTR for
recording while the password menus are
displayed on the monitor.
• A 3-digit number is used for a password
to limit access to all settings.
1. Move the cursor to "PASSWORD LOCK".
("ON" or "OFF")
CAMERA
PRESET POSITION
SPECIAL
COMMUNICATION
SCENE SELECT
LANGUAGE

QUICK SETUP

PASSWORD LOCK OFF
Note:
• "ON" or "OFF" can be selected only after
going through the password verification.
OFF: You can change all settings.
ON: You cannot change all settings.
Default setting: OFF
2. Press the [SET] button.
Password Verification
3. The password verification menu appears.
** PASSWORD? **
0 1 2 3 4 5 6 7 8 9
OK
RESET
NEW PASSWORD
RET TOP
35

Advertisement

Table of Contents
loading

Table of Contents