Notes:
• If zoom limit is set to more than 36x, then zoom
operation pauses at 36x magnification.
• Increasing the zoom to over 36x magnification
(digital zoom) decreases the resolution.
• You cannot set a zoom magnification of greater
than 36x as a preset position.
A Auto Image Stabilizer (STABILIZER)
This function electronically compensates for an
unstable camera image due to movement of a
mounting pole or bracket.
1. Move the cursor to STABILIZER, and then tilt the
joystick left or right to turn the stabilizer on or off.
ON : Automatically compensates for an unstable
image.
OFF : Image stabilizer will not operate. This is the
factory default setting.
The factory default setting is OFF.
Notes:
• The stabilizer may not be effective for the
following subjects.
Example: • Objects illuminated with low lighting
• Single-color objects
(white walls etc)
• Fast moving periodic action, such as mechanical
vibration, may not be tracked.
• The stabilizer does not work during PAN/TILT/
ZOOM/FOCUS or when the camera setup menu is
open.
• When set to ON, some effective pixels on the
edge of the CCD are used by the stabilization
function. This may result in a small reduction in
resolution and a narrower angle of view. After
activating the image stabilizer function, check that
the field of view is correct.
• Image stabilization may not function where there is
excessive camera movement or when the scene is
low light or low contrast objects.
13