About The Setup Menus; List Of Setup Menu - Panasonic WV-CP300 Operating Instructions Manual

About the setup menus

Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.

List of setup menu

Setup item
CAMERA ID
CAMERA
SCENE 1/
SCENE 2
ALC/ELC
SHUTTER
AGC
SENS UP
WHITE BAL
DNR
D&N (IR/ELE)
VMD
SYSTEM
SYNC
PRIVACY ZONE Hides undesired portions in the camera shooting area.
STABILIZER
EL-ZOOM
UPSIDE-DOWN Flips the camera images vertically or horizontally.
LDC
SPECIAL
CHROMA GAIN Adjusts the chroma level (color density).
AP GAIN
PEDESTAL
HUE
PIX OFF
COMMUNICATION
CAMERA
RESET
SER.NO.
LANGUAGE
4
Description
This item specifies the camera title. The camera title that indicates the camera
location and other information about the camera is created with alphanumeric
characters and symbol, and then displayed on the screen.
Performs the camera operation settings.
Selects a scene file. It is possible to register and save the settings as a scene file
in case that it is necessary to change the settings such when shooting at night.
Selects the method of controlling the quantity of light in accordance with the lens
to be used.
Specifies the electronic shutter speed.
Specifies gain adjustment.
Specifies electronic sensitivity enhancement.
Specifies white balance adjustment.
Selects the level of the digital noise reduction function.
Performs each setting regarding the black-and-white mode such as switching
between color and black-and-white images.
Performs settings regarding VMD (Video Motion Detection)
Performs the settings regarding the camera system such as synchronization and
privacy zone.
Specities the synchronization type.
Decides whether or not to enable the image stabilizer.
Switches the electronic zoom on and off.
Adjusts the lens distortion correction to convert the image so that it matches the
square monitor.
Adjusts the aperture level.
Adjusts the pedestal (brightness) level.
Adjust the chroma phase (hue).
Corrects image defects such as flaws.
Performs the communication setting of the system with a receiver into which this
unit is integrated.
Restores the settings in the setup menu to the default settings.
Displays the serial number of this unit.
Selects a language to be used in the setup menu.