Table of Contents
Advertisement
3
3.1
Names of Control Panel Parts and Their Functions
13
14
15
16
17
No.
Part Name
1
Touch panel
2
[Extra Scan] key
3
[Scan] key
4
[Copy] key
5
Sub power switch
6
[Access] key
7
[Interrupt] key
8
[Panel Reset] key
9
[C] (clear) key
10
[Stop] key
11
[Start] key
12
10-Key Pad
13
[Utility] key
3-2
3.1 Names of Control Panel Parts and Their Functions
1
12
Function
Displays various screens and messages.
Touch items in the touch panel to select screens and specify
settings.
Press to use the IP Scanner functions.
(Internet Fax & Network Scan Kit and Network Interface Card
must be installed.)
Press to enter Scan mode.
(Network Interface Card, and either Network Scan Kit or
Internet Fax & Network Scan Kit must be installed.)
Press to enter Copy mode.
Use to turn the copier on and off.
Press when an access code must be entered.
• If the "Copy Track Mode" parameter is set to "OFF", nothing
happens when this key is pressed.
• Press to enter Interrupt mode.
• To cancel Interrupt mode, press the [Interrupt] key again.
Press to reset all modes and functions to their default settings.
• Press to reset the number of copies to "1".
• Press to erase a setting (such as the zoom ratio or size)
selected using the 10-Key Pad.
• Press to stop a copy operation.
• Press to stop the scanning of a document.
Press to start a scanning or copy operation.
Use to enter a number, such as the number of copies.
Used to display the Utility screen.
For more details, refer to "Utility Mode Operations" in the
Advanced Operations volume of the User Manual.
2
3
4
11
10
9
8
Di2010/Di2510/Di3010/Di3510
5
6
7
Advertisement
Table of Contents
