Table of Contents
Advertisement
7.3 Selecting the Orig. > Copy Settings
8
Touch
and
the width of the erased area.
Tip
The erased area can be set
between 1/4 in. and 3/4 in., in
1/16 in. increments.
As a default, the width of the
area erased along the binding
is 1/2 in. To change this default
setting, consult your service
representative.
9
Touch [Enter].
10
Select the desired copy settings.
Note
If you touch [Book], you can
not select [Single-2in1] or [4in1
/ Booklet].
11
Press the [Start] key.
The copies are printed.
Di2010/Di2510/Di3010/Di3510
to specify
7
7-29
Advertisement
Table of Contents
