Adding New Handsets - AT&T E2562 User Manual

ATT-2562CIB-d4.qxd 12/29/2003
Appendix

Adding new handsets

Your telephone can accommodate up to eight cordless handsets. You can add new hand-
sets (sold separately) at any time, but each must be registered with the base before use.
R
ENTER BASE ID
123456789012345
<
OK
HANDSET 2
RDL MENU MEM
6:26 PM Page 36
Before using a new handset, you must register it with the
base. During registration, you must enter the 15-digit ID
number of the telephone base. To find this number, go to
the base, press , scroll down to select
MENU
, then press .
BASE ID OK
Follow the instructions provided with your new handset
to register it for use with your telephone.
The handset provided with your telephone is automatically
registered as Handset 1. Additional handsets will be
assigned numbers in the order they are registered (2, 3, 4,
etc.) up to a maximum of eight handsets.
Handset 1 Handset 2
NOTE: If you select DEREGISTER ALL in the Handset
Settings menu, all handsets will be unusable until each has been
re-registered (see page 15).
36
DISPLAY
Handset 3