Options During Calls - AT&T E2562 User Manual

ATT-2562CIB-d4.qxd 12/29/2003
Line 1 Line 2
Flash Flash
Tone
Volume
Flash
Volume
Tone
6:22 PM Page 12
Telephone Operation
Options while on calls
To adjust volume
Press buttons on the handset or the base to
VOLUME
adjust listening volume. Each button press raises or
lowers volume by one level. Press
current setting for future calls.
Call waiting
If you have Call Waiting service, you will hear a beep if
someone calls while you are already on a call. Press the
button for the line in use to put your current call
FLASH
on hold and take the new call. You can press
any time to switch back and forth between calls.
Ring silencing
Press while the phone is ringing to silence the ringer.
OFF
You can still answer, or let the caller leave a message.
Switching between lines
During a handset call, if you answer an incoming call on
another line, the line previously in use will be placed on
hold. You can press
L1/L2
call on the other line without dropping either call.
During a base call, you must press
or answering a call on another line. Example:
1 Make or answer a call, then press
2 Press or to select the unused line, then
L1 L2
depress the switchhook or press
make or answer a call on the other line.
4 To return to the first call, hang up, press
select the original line, then pick up the base handset
or press
SPEAKERPHONE
Temporary tone dialing
If you have dial pulse (rotary) service, you can switch to
touch tone dialing during a call by pressing
can be useful if you need to send tone signals for access
to answering systems or long-distance services.
12
to save the
OK
FLASH
at any time to switch to the
before making
HOLD
.
HOLD
SPEAKERPHONE
or
L1 L2
.
*
. This
at
to
to