Handset Settings - AT&T E2562 User Manual

ATT-2562CIB-d4.qxd 12/29/2003
Select MENU
HANDSET 1
RDL MENU MEM
Select HANDSET SETTINGS
CALL HISTORY
MAILBOXES

HANDSET SETTINGS

REGISTER
^ V
OK
Scroll to choose desired item
RINGERS
LOW BATT TONE
RANGE TONE
KEYPAD TONE
^ V
SET
Press SET to select
LOW BATT TONE
RANGE TONE
KEYPAD TONE
CONTRAST
^ V
SET
6:22 PM Page 14
Telephone Operation
Handset settings
Ringers
At this menu you can set default ring volumes, or turn the
ringer off. You can also select one of six call melodies.
Settings are selectable for the intercom and each line.
Follow the menu instructions to select the volume and
melody you prefer, then press
Low battery tone
The handset is factory programmed to alert you with a
tone when the battery is low and needs recharging.
Press or , then press
ON OFF
Out-of-range tone
The handset is factory programmed to alert you with a
tone when the handset is too far from the base. Press
or , then press
ON OFF OK
Keypad tone
The handset is factory programmed to beep at each
keypress. Press or
ON OFF
Contrast
At this menu you can adjust screen contrast to one of 16
<>
levels. Use the buttons to select the level you prefer,
then press to confirm.
OK
Enhanced mode
^V
Use the buttons to select On, Off or Auto, then
press to confirm. When on, this mode may improve
OK
sound quality and range, but will use more battery
power. In Auto mode, the handset switches to Enhanced
Mode when reception is poor.
Rename
Select Rename to change the name (up to 14 letters) that
identifies your handset in all Intercom/Transfer menus
(see page 17 to enter letters). Press
14
or to confirm.
OK SAVE
to confirm.
OK
to confirm.
, then press to confirm.
OK
to confirm.
SAVE